{"product_id":"fermacell-greenline-joint-stick-310ml","title":"Fermacell Greenline Joint Stick - 310ml","description":"The fermacell Jointstick greenline is a hazard label-free, moisture cross-linked polyurethane-based, ready mixed adhesive. The adhesive does not foam up during the setting process; it is tough-elastic once hardened.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor jointing square edged fermacell Gypsum Fibreboards for walls and ceilings and for jointing fermacell Powerpanel H2O in high humidity exposure areas - class A0 (pursuant to ZDB info sheet). Not suitable for the subsequent filling\/bonding of joints.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures and Properties\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eNo hazard label, low in harmful substances and emissions - tested by eco-Institut Cologne\u003c\/li\u003e\n\u003cli\u003eFree of isocyanates, plasticizers, silicone and solvents (pursuant to TRGS 610)\u003c\/li\u003e\n\u003cli\u003eEasy to use - bonds and fills joints at the same time - optimised application for walls and ceilings\u003c\/li\u003e\n\u003cli\u003eSpecial applicator nozzle that dispenses the correct amount of adhesive right in the middle of the joint\u003c\/li\u003e\n\u003cli\u003eHigh joint strength\u003c\/li\u003e\n\u003cli\u003eNo cracks in the joints when applied correctly\u003c\/li\u003e\n\u003cli\u003eFull board strength even for un- supported horizontal joints\u003c\/li\u003e\n\u003cli\u003eEasy cleaning of material, tool etc.\u003c\/li\u003e\n\u003cli\u003eThe ready mixed adhesive is easy to apply; the special applicator nozzle provides the correct amount needed, right into the middle of the joint\u003c\/li\u003e\n\u003cli\u003eIf applied correctly, Fermacell Jointstick provides a high strength joint, without any cracks.\u003c\/li\u003e\n\u003cli\u003eSize: 310ml\u003c\/li\u003e\n\u003cli\u003eColour: Beige\u003c\/li\u003e\n\u003cli\u003eCoverage: 20 linear meters\u003c\/li\u003e\n\u003cli\u003eDrying Time: 18 - 36hours for best results\u003c\/li\u003e\n\u003cli\u003eEnsuring perfect results for any application; this joint stick is part of an accessories range for installation of Fermacell Fibreboards\u003c\/li\u003e\n\u003cli\u003eIt is recommended, when working with Fermacell Jointsitck that protective gloves are worn and that skin, eyes, tools and clothing do not come into contact with unhardened adhesive\u003c\/li\u003e\n\u003cli\u003eIf this does happen, immediately wash with water and soap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eBrowse Other Tile Adhesive Products:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/tiles4less.co.uk\/products\/bostik-ob1-hybrid-sealant-and-adhesive-x-290ml-all-colours\" target=\"_new\"\u003eBostik OB1 Hybrid Sealant and Adhesive\u003c\/a\u003e:\u003c\/strong\u003e A versatile hybrid sealant and adhesive that can be used on various surfaces. Available in different colours to match your tiles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/tiles4less.co.uk\/products\/rapid-porcelain-tile-adhesive-all-colours\" target=\"_new\"\u003eRapid Porcelain Tile Adhesive\u003c\/a\u003e:\u003c\/strong\u003e A fast-setting adhesive suitable for porcelain tiles. Provides a strong bond and allows for grouting after just 2 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/tiles4less.co.uk\/products\/vitri-flex-wall-and-floor-tile-adhesive-all-colours\" target=\"_new\"\u003eVitri-Flex Wall and Floor Tile Adhesive\u003c\/a\u003e:\u003c\/strong\u003e A polymer-modified adhesive suitable for various types of tiles. Ideal for use on walls and floors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/tiles4less.co.uk\/products\/rapid-porcelain-and-stone-s1-tile-adhesive-white\" target=\"_new\"\u003eRapid Porcelain and Stone S1 Tile Adhesive\u003c\/a\u003e:\u003c\/strong\u003e Specifically designed for natural stone tiles, this adhesive provides a strong bond and allows for grouting after just 4 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/tiles4less.co.uk\/products\/benferflex-rapido-rapid-set-adhesive-x-20kg-all-colours\" target=\"_new\"\u003eBenferflex Rapido Rapid Set Adhesive\u003c\/a\u003e:\u003c\/strong\u003e A rapid-setting adhesive suitable for both walls and floors. Ideal for use with larger format tiles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/tiles4less.co.uk\/products\/semi-rapid-set-s1-adhesive-all-colours\" target=\"_new\"\u003eSemi-Rapid Set S1 Adhesive\u003c\/a\u003e:\u003c\/strong\u003e A flexible adhesive suitable for use on underfloor heating systems. Allows for grouting after 24 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/tiles4less.co.uk\/products\/standard-set-flexible-s1-adhesive\" target=\"_new\"\u003eStandard Set Flexible S1 Adhesive\u003c\/a\u003e:\u003c\/strong\u003e Ideal for fixing tiles to difficult substrates, this flexible adhesive allows for grouting after 24 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/tiles4less.co.uk\/products\/benerflex-grip-flex-standard-set-adhesive-x-25kg\" target=\"_new\"\u003eBenferflex Grip Flex Standard Set Adhesive\u003c\/a\u003e:\u003c\/strong\u003e Provides a strong grip and can be used on various surfaces. Allows for grouting after 24 hours.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"What is the Fermacell Greenline Joint Stick used for?\\r\\nThe Fermacell Greenline Joint Stick is a jointing compound used to fill gaps and joints between Fermacell boards and other building materials. It is designed to provide a smooth finish that can be painted or wallpapered over.\\r\\n\\r\\nHow is the Fermacell Greenline Joint Stick applied?\\r\\nThe joint stick can be applied with a putty knife or trowel, and should be smoothed out to ensure a consistent finish. It is recommended to apply the jointing compound in a thin layer and to wait for it to dry completely before sanding or painting over it.\\r\\n\\r\\nIs the Fermacell Greenline Joint Stick eco-friendly?\\r\\nYes, the Fermacell Greenline Joint Stick is an eco-friendly product made from natural gypsum and recycled paper fibers. It is free from harmful substances and emissions, making it a sustainable choice for construction and renovation projects.\\r\\n\\r\\nCan the Fermacell Greenline Joint Stick be used on other types of boards?\\r\\nWhile the Fermacell Greenline Joint Stick is specifically designed to work with Fermacell boards, it can also be used with other types of boards such as plasterboard, cement board, and wood-based panels.\\r\\n\\r\\nHow long does it take for the Fermacell Greenline Joint Stick to dry?\\r\\nThe drying time of the jointing compound can vary depending on factors such as humidity and temperature. However, it typically takes around 24 hours for the jointing compound to dry completely. It is recommended to wait for the compound to dry completely before sanding or painting over it.\\r\\n\\r\\nIs the Fermacell Greenline Joint Stick easy to sand?\\r\\nYes, the Fermacell Greenline Joint Stick is easy to sand once it has dried completely. It is recommended to use a fine-grit sandpaper and to sand in a circular motion to avoid leaving scratches on the surface.\"}'\u003e\u003cstrong\u003eWhat is the Fermacell Greenline Joint Stick used for? \u003c\/strong\u003eThe Fermacell Greenline Joint Stick is a jointing compound used to fill gaps and joints between Fermacell boards and other building materials. It is designed to provide a smooth finish that can be painted or wallpapered over. \u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHow is the Fermacell Greenline Joint Stick applied? \u003c\/strong\u003eThe joint stick can be applied with a putty knife or trowel, and should be smoothed out to ensure a consistent finish. It is recommended to apply the jointing compound in a thin layer and to wait for it to dry completely before sanding or painting over it. \u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eIs the Fermacell Greenline Joint Stick eco-friendly? \u003c\/strong\u003eYes, the Fermacell Greenline Joint Stick is an eco-friendly product made from natural gypsum and recycled paper fibers. It is free from harmful substances and emissions, making it a sustainable choice for construction and renovation projects. \u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eCan the Fermacell Greenline Joint Stick be used on other types of boards? \u003c\/strong\u003eWhile the Fermacell Greenline Joint Stick is specifically designed to work with Fermacell boards, it can also be used with other types of boards such as plasterboard, cement board, and wood-based panels. \u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHow long does it take for the Fermacell Greenline Joint Stick to dry? \u003c\/strong\u003eThe drying time of the jointing compound can vary depending on factors such as humidity and temperature. However, it typically takes around 24 hours for the jointing compound to dry completely. It is recommended to wait for the compound to dry completely before sanding or painting over it. \u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eIs the Fermacell Greenline Joint Stick easy to sand? \u003c\/strong\u003eYes, the Fermacell Greenline Joint Stick is easy to sand once it has dried completely. It is recommended to use a fine-grit sandpaper and to sand in a circular motion to avoid leaving scratches on the surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch3\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"What is the Fermacell Greenline Joint Stick used for?\\r\\nThe Fermacell Greenline Joint Stick is a jointing compound used to fill gaps and joints between Fermacell boards and other building materials. It is designed to provide a smooth finish that can be painted or wallpapered over.\\r\\n\\r\\nHow is the Fermacell Greenline Joint Stick applied?\\r\\nThe joint stick can be applied with a putty knife or trowel, and should be smoothed out to ensure a consistent finish. It is recommended to apply the jointing compound in a thin layer and to wait for it to dry completely before sanding or painting over it.\\r\\n\\r\\nIs the Fermacell Greenline Joint Stick eco-friendly?\\r\\nYes, the Fermacell Greenline Joint Stick is an eco-friendly product made from natural gypsum and recycled paper fibers. It is free from harmful substances and emissions, making it a sustainable choice for construction and renovation projects.\\r\\n\\r\\nCan the Fermacell Greenline Joint Stick be used on other types of boards?\\r\\nWhile the Fermacell Greenline Joint Stick is specifically designed to work with Fermacell boards, it can also be used with other types of boards such as plasterboard, cement board, and wood-based panels.\\r\\n\\r\\nHow long does it take for the Fermacell Greenline Joint Stick to dry?\\r\\nThe drying time of the jointing compound can vary depending on factors such as humidity and temperature. However, it typically takes around 24 hours for the jointing compound to dry completely. It is recommended to wait for the compound to dry completely before sanding or painting over it.\\r\\n\\r\\nIs the Fermacell Greenline Joint Stick easy to sand?\\r\\nYes, the Fermacell Greenline Joint Stick is easy to sand once it has dried completely. It is recommended to use a fine-grit sandpaper and to sand in a circular motion to avoid leaving scratches on the surface.\"}'\u003eCustomer Feedback\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003eThe Fermacell Greenline Joint Stick has garnered positive feedback from customers who have used it. Many have highlighted the product's ease of use and professional-looking finish, as well as its eco-friendly nature. Customers appreciate the low VOC content and natural ingredients, which contribute to a minimal dust production during application.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Joint Stick's effectiveness and environmentally friendly credentials have been commended by numerous customers, who have found it a suitable alternative to traditional jointing compounds that often emit strong chemical odors. Users have also been pleased with the neat and smooth appearance of the finished product. The Joint Stick is designed for use with various joint widths, although some customers have reported difficulties when working with larger joints.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWhile the Fermacell Greenline Joint Stick may not be the quickest drying option on the market, its eco-friendly ingredients and professional results have made it a popular choice among customers. Despite some challenges when handling larger joint widths, the majority of users have found the Joint Stick to be an effective and environmentally responsible jointing compound, and they would recommend it to others in search of a sustainable option.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"What is the Fermacell Greenline Joint Stick used for?\\r\\nThe Fermacell Greenline Joint Stick is a jointing compound used to fill gaps and joints between Fermacell boards and other building materials. It is designed to provide a smooth finish that can be painted or wallpapered over.\\r\\n\\r\\nHow is the Fermacell Greenline Joint Stick applied?\\r\\nThe joint stick can be applied with a putty knife or trowel, and should be smoothed out to ensure a consistent finish. It is recommended to apply the jointing compound in a thin layer and to wait for it to dry completely before sanding or painting over it.\\r\\n\\r\\nIs the Fermacell Greenline Joint Stick eco-friendly?\\r\\nYes, the Fermacell Greenline Joint Stick is an eco-friendly product made from natural gypsum and recycled paper fibers. It is free from harmful substances and emissions, making it a sustainable choice for construction and renovation projects.\\r\\n\\r\\nCan the Fermacell Greenline Joint Stick be used on other types of boards?\\r\\nWhile the Fermacell Greenline Joint Stick is specifically designed to work with Fermacell boards, it can also be used with other types of boards such as plasterboard, cement board, and wood-based panels.\\r\\n\\r\\nHow long does it take for the Fermacell Greenline Joint Stick to dry?\\r\\nThe drying time of the jointing compound can vary depending on factors such as humidity and temperature. However, it typically takes around 24 hours for the jointing compound to dry completely. It is recommended to wait for the compound to dry completely before sanding or painting over it.\\r\\n\\r\\nIs the Fermacell Greenline Joint Stick easy to sand?\\r\\nYes, the Fermacell Greenline Joint Stick is easy to sand once it has dried completely. It is recommended to use a fine-grit sandpaper and to sand in a circular motion to avoid leaving scratches on the surface.\"}'\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Tiles4Less","offers":[{"title":"Default Title","offer_id":53307799437642,"sku":"FC36S79224","price":15.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7239\/6362\/files\/68247da10d7a805fa815414be0fd18cd2ca420fdcopy.jpg?v=1763027657","url":"https:\/\/6c0ee7-5b.myshopify.com\/products\/fermacell-greenline-joint-stick-310ml","provider":"Glazing Supplies Direct","version":"1.0","type":"link"}